ECOO-G Processless (process-free)
Introducing the ECOO-G Thermal Plate – Eco-Friendly, Processless Printing Solution
Runs directly on press after CTP exposure, no chemical processing required.
Reduces costs for labor, water treatment, and developer tank maintenance.
100% chemical-free and environmentally friendly, comparable to Sonora XP and Agfa Azura plates.
Key Characteristics
Employs a negative non-ablation photosensitive system.
Fully compatible with all major market devices.
Enables direct on-press printing after thermal CTP plate exposure, with no additional processing required.
Delivers excellent dot reproduction, stable performance, and wide processing latitude.
Maintains long latent image stability, allowing plates to be stored for at least one week after imaging.
Constructed with a high-quality aluminum substrate and professional coating for superior durability and print quality.
Recommended Application Procedure for ECOO-G
Clean the blanket thoroughly – Ensure that all residual ink is completely removed from the blanket to prevent contamination and achieve optimal print quality.
Engage the water roller – Start the press machine and run the water roller for 30–40 seconds to properly moisten the plate and prepare it for inking.
Engage the ink rollers – Allow the ink rollers to run for 20–30 seconds to ensure even ink distribution across the plate before printing.
Load the paper and start printing – Once the plate is properly prepared and rollers are engaged, load the paper and commence printing for consistent, high-quality results.
| Model | ECOO-G |
| Plate Type | Non-ablation thermal-negative type |
| Application | High-grade commercial and newspaper printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.15mm / 0.30mm |
| Spectrum scope | 800-850nm |
| Platesetter | Various dominant thermal platesetters in the market |
| Low-energy imaging | 130-150 MJ/ m² |
| The period of latent image stabilization | ≤7 days |
| Recommended screen method | 1-99% @200 LPI AM or 20μm FM or mixture |
| The paper number of start-up | <50 sheets |
| Safety light | 4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended. |
| Processing | Without processing, directly on the press |
| Run Length | 100,000 impressions, actual run length depends on printing conditions |
| Baking | No recommended |
| Maximum short grain width | Maximum width 1280 mm |
| Photosensitive wavelength | 830 nm |
| Coating color | Grey |
| Shelf life | 12 months under recommended condition |
| Transportation | Packed in seal and stored using prevention from light, moisture, overheating, and high humidity |
| Storage | Recommended condition: 18ºC-24ºC, 40%-50% RH. |
